|
|
Electronic Safe Locks
Model Z03 D-Drive
Related Links:
FEATURES
- One million codes to choose from.
- Ships from factory in multiple user mode but can easily be changed to dual control through the keypad.*
- Add a duress module to provide holdup protection with a simple duress code.
- Time delay override can be either single control or dual control.
- Factory programmed Management Reset Code.
- Programmable time delay of one to ninety-nine minutes can easily be activated from the keypad.
- Time delay opening window can be set from two to nine minutes.
- Penalty lockout feature shuts the lock down for ten minutes if five or more incorrect codes are entered in a row to deter random code entry attempts.
- All programming is accomplished via the keypad; no special programming tools required.
- Deadlocking, solenoid blocked bolt withstands over 225 lbs. of end pressure.
- Lock bolt is retracted and extended by turning the keypad ring. Mechanical bolt control assures high reliability.
- Uses S&G's "Magic Module¨ footprint to match the mounting dimensions of most mechanical and electronic safe locks.
- Low profile keypad is only 1" (25.4 mm) high, and is 3 3/4" (9.5 cm) in diameter.
- Keypads available with either brass or chrome trim ring.
* This change is non-reversible.
Options
- Bolt Position Indicator which can be field installed on any D-Drive lock, for connection to any device that can be relay activated.
- Duress Module (to send holdup signals from the D-Drive lock to your alarm system).
|
|