To open the lock from the input panel, you must enter your user ID and PIN numbers. The default code manager code is ID: 01 PIN: 111111.

The procedure is as follows:
1. First press the # key. The lock will beep once, and the LCD display will prompt you for your ID.
2. Enter your ID and press # to move the cursor to the next line.
3. Enter your PIN. Press # again. If there is only one lock on a door it will open.
4. If there are locks on two doors, the LCD will prompt you to select the door to be opened.

WHICH DOOR?
(1 OR 2)

Choose 1 or 2
Press #

The LCD displays which lock is opening (locked   or unlocked   ).

LOCK1       LOCK2  

ENTRY ERRORS
If you make a mistake in your entry and press #, the lock beeps a series of short, fast beeps, and the following message is displayed. Wait for the lock to clear, (the date and time displays) and start your entry again.

INVALID PIN OR
TOUCH MEMORY

You may also cancel an entry by pressing the * button, IF you haven’t already pressed #.

 

Applicable to:
6300

Tagged: