You must set the date in order to use the audit trail function. The date should be entered in DDMMYY format, where DD = day, MM = month, and YY = year. The Date should be set when the lock is first set up and prepared for use. To set the date, perform the following steps:

Enter 73* (SD)
2-digit Programmer PIN position (00) + 6-digit PIN Code #
2-digit Manager or Supervisor PIN position (01-09) + 6-digit PIN Code#
Date in DDMMYY format#
Date in DDMMYY format#

Date set for September 14, 2009 (using factory default codes).

EX:
73* 00123456# 02020202# 140909# 140909#

 

Applicable to:
6126, 6127 Audit Lock