To download the audit trail, you must use the green/red Touch Memory Key.

Default Programmer code is ID: 00 PIN: 12345678

1. Enter 28 *
2. The LCD now asks for your ID and PIN:

ID # : XX
PIN #: XXXXXX

3. Enter Your ID number #
4. Enter Your PIN code #

The LCD displays the options available for the audit trail.

1-PRINT 2-TOUCH
3-DISPLAY AUDIT

Note: The local PRINT option on the LCD when requesting audit trail is not currently available. If this is selected the LCD will indicate PRINTING AUDIT TRAIL. No data is lost.

5. Press: 2

The LCD instructs you to hold the Touch Memory Key on the side port.

Put Touch Memory
On Sid Port

Clip in the Red/Green Touch Memory Key against side port. Continue holding while the LCD displays the following message:

LOADING PROGRAM
> > > > > > > > > > > >

When the LCD returns to time/date display, the audit trail has been loaded onto the Touch Memory Key. It can now be uploaded into your computer software. Use the Audit Viewer window of the 6300 software to upload the audit trail.

 

Applicable to:
6300

Close